Today we will look at what’s available in awning choices for trailers, 5th wheels and motor homes. There are three general awning applications: door, window, and patio. The latter is the largest and by far the most popular. Yes, the patio awning is found on nearly every trailer and motorized recreational vehicle we see.
The patio awning, however, is found in two installation configurations; either fastened to the main body or attached to a slide or pop out. The type that is fixed to the main body is usually larger than that of a slide attached unit. This, in part, is due to it not being restricted to the size of the slide. Additionally, the main body installed types have more support than a slide mounted unit therefore can withstand more wind pressure. Both, however have trade-offs. Many of the main body installed awnings don’t work real well with slide equipped vehicles that have a slide directly under the awning. This not only reduces the shade provided but also may cause wear on the awning canvas where it touches the slide top. The slide mounted awnings are smaller and may be constructed lighter so as not to overload the slide. These also may demonstrate a more pronounced movement of the coach during gusty days caused by leverage the slide provides.
The manual requires no electrical energy, as you would obviously guess. The majority of the powered awnings operate on 12 volt D.C. while some of the higher end lines, such as Girard, run on 120 volts A.C. The A.C. powered units are generally operated through an onboard inverter, thus alleviating the need for shore or generator power support. The use of the higher voltage substantially reduces the operating heat and the wire size required. This is due to the 120 VAC powered unit only requiring a tenth of the amperage to accomplish the job when compared to that of the 12 VDC model.
So, how do these work in the real world. Well, all work great, as far as shade is concerned, but what about wind? Most manual operated awnings provide an easy method to slope the canvas so as to run the rain off at a desired end. Additionally, they can be set up to endure strong winds in excess of 30 or 35 miles per hour. Powered awnings, on the other hand, can not easily be set to angle rain to a desired end and are subject to far more buffeting during wind events that are far below those endured by the manual type.
So, what type of awning would be the best to get? I suppose it depends on your individual needs and RV application. There are many campgrounds and geographic areas that are protected from wind, or wind gusts. These areas could support the use of either without significant challenges. But, there are also many areas that are subject to higher winds, or wind gusts, that may very well reduce the time that this awning can be used.
Okay, now all you have to do is check the material quality and the color. Some are solid colors, some faded, even striped or paterned. I guess the bottom line here is, just because it works spiffy-like, and costs more, may not mean it is the best for your application. On the other hand, a power model may be just what the doctor ordered. It’s all up to you, or more likely, your individual needs.
Bringing You A Shady View – Lug_Nut Peter Mercer